Vise ELITE stonfo - art. 653

Super-equipped
Ideal for professional fly tiers
Interchangeable jaws
Quick and intuitive adjustments

art. no.: 10-VIS106

Available immediately
Delivery time: 3 - 4 Workdays
(IE - May vary for other countries)

265,00 €

incl. 23% VAT , plus

For this product you will receive 265 reward points with a value of 7,95 €

The ELITE vise produced by the Italian company Stonfo is a mix of innovation and technology, and has been designed to meet the needs of the most experienced fly tiers. Made of stainless steel and aluminium it is really solid and robust. The only plastic element is the pedestal base, but even here top of the range materials have been used and overall we can safely say that with proper use it is practically indestructible. The numerous practical accessories are able to facilitate even the most complex steps, making the tying of artificial flies pleasant and satisfying. The B and F elements can be removed and placed on the opposite side to make the vise also suitable for left-handed people.

The package contains:

TTR pedestal base
Universal jaw
Adjustable spring material clip
Accessory for parachute
Bobbin support
Allen spanners

Before we see everything in detail let's take a general look at the vise:

Crank handle 360° rotation
Drag knob
Jaw inclination joint
Adjustable spring material clip
Bobbin support
Hook pre-block screw
Super soft lever device

PEDESTAL BASE:

The pedestal base is quite large (16.2 x 19.2 x 4.2) and thanks to its weight (1.37kg) it is really very stable. The 4 anti-slip feet further increase its stability by preventing the vise from moving during fly tying.

On the surface there are 2 large material holder niches inside which you can store hooks, tungsten beads or any other fly tying material you want to keep at hand at all times. The rounded edges inside the niches make it very easy to take even the smallest materials such as tungsten beads from them.

On the back of the pedestal base you will find 10 tool holes. Inside you can store bobbins, scissors or pliers. One of these holes serves as an attachment for the magnifying glass (can be purchased separately).

However, it is possible to mount the vise on the table clamp (can be purchased separately).

VISE:

The jaw are made of stainless steel and have a universal profile, which allows you to accommodate any size of hook. However, it is interchangeable and can be replaced with a specific jaw (can be purchased separately).

The super soft lever closure is very tenacious and you won't run the risk of the hook moving during the tying. To fix the hook in the correct way you have to position the lever downwards in open mode and insert the hook into the jaw. Then you have to gently tighten the jaws by turning the pre-blocking screw clockwise without exaggerating, just make sure that the hook remains stationary. Once locked in the desired position, simply move the lever upwards in closed mode to secure the hook permanently.

Attention: It is not necessary to apply excessive force to the lever when locking the hook, excessive force could damage the jaw. Also remember not to place the hook too much at the end of the tip of the jaw because you run the risk of chipping it (see photo).

By loosening bolt C it is possible to change the inclination of the jaw. This adjustment can help you to position the shank of the hook in line with the axis of rotation of the vise, allowing you to rotate the hook perfectly on its axis. (watch the video)

The 360° rotation of the jaw, thanks to the precision bearings, is very smooth and can be moderated at will by acting on the drag knob B. To facilitate this rotation there is a crank handle A at the rear. (watch the video)

Embedded in the jaw is a practical adjustable spring material clip D, which is used to move hackles, tinsel or any other fly tying material that you do not need at the moment, and then pick it up at a later time. This helps you to be more relaxed in certain steps of tying.

On the opposite side you will also find a handy pin E on which you can run the tying thread through. This is used to move the bobbin out of the work area and get the same advantages as you just saw.

ACCESSORIES:

The fly tying vise ELITE by Stonfo is equipped with a very interesting modular accessory because depending on how it is mounted it can be used both as a support to help you to tie parachute (fig.1) and as a bobbin support (fig.2).

The arm is mounted on the vise by means of the arm lock screw, and according to your needs you can mount either the parachute plier or the bobbin support.

Details:

Large and stable pedestal base (1.37kg)
4 non-slip feet on the base
10 tool holders on the base
2 material niches on the base
Stainless steel jaw, adjustable and interchangeable
Smooth 360° rotation
Moderate rotation through clutch
Hook rotation on its axis
Adaptable for left-handers

There are no reviews yet.

Contact data

First name

Last name - optional

Question about item

Your question

Frequently asked questions

Manufacturer information:

Stonfo

, ,